|
|
K29800
Bearing Compatibility Tester
Tests the bearing compatibility (lacquering, deposits, corrosion) and
stability of turbine lubricants when subjected to an endurance test. Consists
of bearing housing assembly with test bearing and support bearings, hydraulic
loading device, oil circulation system with thermostatic and hydrostatic
control, and powerful 5hp variable speed drive system. Digital LCD controls
monitor oil pressure, oil temperature and spindle rpm, and a built-in strip
chart recorder plots oil temperature at three different points—at the bearing
housing, in-line, and in the reservoir. Equipped with overtemperature and low
pressure cut-off switches and a cartridge oil filter for convenient ‘flush
run’ operation. All components are mounted in a sturdy angle iron frame. A
removable steel guard protects drive train components.
Specifications
Conforms to the specifications of: FTM 791-3452
Journal Drive Motor: 5hp variable speed, with digital 0-3500rpm control. Fan
cooled with thermal overload protection.
Lubricant Flow: 3.8L/min. gear pump recirculating 1.9-23L/min. of test
lubricant to support bearing and test bearing. Digital oil pressure
circulation.
Temperature Control: Sump temperature (0-500°F) with digital indication and
recording of temperature at bearing housing, sump and in-line.
Bearing Load: Hydraulic loading device maintaining 1520 kPa (220 psig) on the
loading bearing.
Electrical Requirements
200-240V 50/60Hz, 3-Phase, 20A
380V 50/60Hz, 3-Phase, 12A
440V 50/60Hz, 3-Phase, 10A
Dimensions lxwxh,in.(cm)
48x36x54 (122x91x137)
Net Weight: 1300 lbs (589.7kg)
Shipping Information
Shipping Weight: 1582 lbs (717.6kg)
Dimensions: 101.7 Cu. ft.
|
